Return
Return
Product display
Product manual
CR-500It is produced using the chlorination process and undergoes special surface treatment, with excellent optical properties and low ion content. It is suitable for various electrophoretic coatings and general indoor coatings, and belongs to a type of coating specific titanium dioxide.
Typical technical indicators of the product
|
standard |
ISO591：R2 ASTM D-476-84：II(IV) |
|
Surface Treatment |
Aluminum compound |
|
TiO2 content，% |
94.1 |
|
Rutile type content，% |
99.9 |
|
Carbon black base color（CBU） |
14.0 |
|
L* |
98.4 |
|
b* |
1.70 |
| proportion | 4.1 |
| oil absorption，g/100g | 18.0 |
| Average particle size，μm | 0.28 |
|
aqueous suspension pH |
7.5 |
|
Electrical resistivity of water extraction solution，Ω•m |
345 |
| Product characteristics | High whiteness, high gloss, high coverage, low ion content |
| Apply Recommendations |
Electrophoretic primer, secondary electrophoresis, bottom two in one electrophoretic coating, electrophoretic topcoat and other automotive electrophoretic coatings powder coating Water based and solvent based oils |
| Safety and Health | Teragram®Series titanium dioxide products are non-toxic. If inhaled in large quantities, they should be immediately transferred to a place with fresh air; If the eyes come into contact with titanium dioxide, immediately rinse with plenty of water; If necessary, please have professional medical personnel handle it. |
| Product packaging | The product is packaged in full paper bags, with a net weight of 25kg per bag. If the customer has special requirements, different forms of packaging can also be provided. |
| Storage and transportation | Products should be classified and stored in batches in a well ventilated and dry place. They cannot be directly stored on the ground and must be separated by pallets or plastic sheeting. Attention should be paid to moisture and sun protection. It is strictly prohibited to come into contact with items that may react with the product. During transportation and loading and unloading, it is necessary to load and unload gently. Products of the same batch number should be placed in a centralized manner to prevent packaging contamination and damage. The product should be protected from rain and direct sunlight during transportation. |
